Install Stock Firmware In Any Samsung Device

Hello Friends our many friends first wants to root their device and after that they wish to unroot their device but using any method we could not unroot our device completely So today on request of many frineds I decided to post that how to Download Stock Firmware in our Samsung Device and unroot it completely.




Steps To Install Stock Firmware in Your Device:-

Important:- Enable USB Debuging Before Doing This you can read my this post to enable usb debugging.
How To Enable USB Debugging in Galaxy

1- Download the stock firmware for your device- 
First thing which you needs to install firmware is the Stock Firmware for your Device.

 To download firmware for your device Follow Steps:-

• Go to this site click HERE .

• Now SignUp for New account Filling your details.
• After Successful Signup Login TO your Account & GO to Firmware Section.
• Now Search For your device stock ROm from search box.

Ex- We Searchs For Samsung S Duos(7562)

• Now on next page Select your country and Select your suitable Firmware

• Now On Next page CLick on Regular Download.

• Now confirm you download and download your Firmware which will be in .zip file.

• After Downloading Extract It and get .tar.md5 file.

2- Download Odin Flash Tool-

 This is an Android developer tool that will allow you to push your stock firmware from your computer to your Android device.

• GO to Odin Link From here
• Now download Odin V3.09.

3

Download and install the Samsung drivers-

 If you haven't connected your device to your computer before, you'll need to install the Samsung USB drivers. The quickest way to do this is to download the drivers from Samsung [herehttp://developer.samsung.com/technical-doc/view.do?v=T000000117]. Download the ZIP file, double-click it to open it, and then extract the installer. Run the installer to install the drivers.

4- Now Take your necessary data and reject your Sim Card and Memory card and switch Off the Device.
5-Now Hold the Volume Down, Home, and Power buttons. and open your device in Download mode. 

6-Connect device to your computer via USB.

7-Launch Odin3- You should see a green box on the left side of the "ID:COM" section. If you don't see this, your Samsung USB drivers are not properly installed.

8-Click the .PDA button in Odin3. Browse for the .tar.md5 stock firmware file that you downloaded.

9-Click the .Start button to begin the unroot process. This may take about 5-10 minutes. When the process is complete, you'll see "PASS!" in the top box in Odin3. Your Galaxy should boot into the normal TouchWiz operating system.

11-Perform a factory reset to fix a boot loop. If your phone gets stuck in an infinite boot loop after unlocking, you'll need to perform a factory reset. This will delete everything on the device.

• Press and hold the Power button to shut off the device.
• Press and hold Volume Up, Home, and Power to boot into the Recovery menu.
• Use the Volume buttons to select "wipe data/factory reset" and press the Power button to select it.
• Select "wipe data partition" and then "reboot system now". Your Galaxy will reboot and wipe all of the data, returning it to factory settings.

That's It your Device is competely Reset and Installed the Stock Firmware.ALso your device is unrooted completely.

Don't Forget to Share it with your friends and keep visting to get More tricks.